Virnig HSBP132

Double tap to zoom

FREE FLOATING DESIGN AUTOMATICALLY ADAPTS TO UNEVEN GROUND IN ALL DIRECTIONS WHILE ALLOWING FULL DOWN PRESSURE
DUAL HYDRAULIC CROSSOVER RELIEF VALVES PROTECT THE ATTACHMENT BY ANGLING THE BLADE UPON IMPACT
INDEPENDENTLY ANGLE EACH WING 60° & ANGLE THE BLADE 30° LEFT OR RIGHT, FROM INSIDE THE CAB
POSITION BLADE & WINGS AT ANY POINT BETWEEN THOSE SHOWN BELOW
TRIP EDGES ON MAIN BLADE & WINGS PROTECT OPERATOR & EQUIPMENT
REVERSIBLE, HARDENED MAIN EDGE & AR400 WING EDGES INCREASE DURABILITY & ALLOW 5 1/2″ OF WEAR

MODEL	HSBP132
Overall Width, Straight (Inches)	136.5
Width at Full Angle, Both Wings Open (Inches)	120.5
Width at Full Angle, One Wing Open (Inches)	96.5
Width at Full Scoop (Inches)	108.5
Main Moldboard Width (Inches)	74
Overall Height (Inches)	31
Overall Depth, Straight (Inches)	39.5
Angle: Blade / Wing (Degrees)	(+/-) 30 / 60
Moldboard Thickness (Inches)	0.19
Edge: Main / Wing (Inches)	5/8 x 8 Bolt-on / 1/2 x 7 3/4 AR400, Bolt-on
Blade Oscillation (Degrees)	+/- 4
Float Link Angle (Degrees)	+/- 5
Cylinder Bore / Stroke (Inches)	2.0 / 8.375
Cylinder Pins / Hinge Pins Diameter (Inches)	1.25 / 1.563
Approximate Weight (Pounds)	1600*
Recommended Loader Capacity	Greater than 1800 pounds

*Weight with Steel Edge installed.

V60 Hydraulic Snow Blade/Pusher HSBP132