309.751.4661   Silvis, IL - Map & Hours
Open today at 7:30am
  • Menu

Land Pride RCP3760

New / Land Pride / Rotary Cutters / RCP27 & RCP37 SERIES PARALLEL ARM CUTTER / RCP3760

Land Pride RCP3760 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Land Pride RCP3760 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

Features Benefits
Tractor hp Range
RCP(M)2760
RCP(M)3760
Designed for 75 minimum hp tractor with minimum weight of 8,000 lbs. (3629 kg)
Designed for 95 minimum hp tractor with minimum weight of 12,000 lbs. (5443 kg)
Gearbox hp Rating 150 hp
3 Point Design Does not tie up a tractor. Three point hook up is easy to hook up and remove from tractor
Cutter Deck Visibility Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind.
Factory Assembled Arrives ready for the customer, saves time and money. (Excluding fluids).
Grease Ports All grease ports are easily accessible for servicing.
10' Transport Width Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.
Parallel Arm Design Three cylinders used in a parallel arm design allows any cylinder to be adjusted without changing the position of the others. Means less positioning.
Long Horizontal Reach
RCP(M)2760 = 15'-6" (4.72 m)
RCP(M)3760 = 18'-10" (5.74 m)
Good access for reaching vegetation far away from the tractor.
Better access for reaching vegetation far away from the tractor.
Above Grade Vertical Reach
RCP(M)2760 = 11'-5" (3.47 m)
RCP(M)3760 = 13'-5" (4.08 m)		 Good access for reaching up embankments and cutting low over hanging limbs.
Better access for reaching up embankments and cutting low over hanging limbs.
Below Grade Reach
RCP(M)2760 = 9'-1" (2.76 m)
RCP(M)3760 = 11'-0" (3.35 m)		 Good access for reaching down embankments.
Better access for reaching down embankments
180 Degree Operating Tilt Arc Cutter head can be positioned to reach different angles.
Cat. 2 & 3; 540 or 1000 rpm Fits a wide variety of tractors.
40 Gallon Oil Reservoir Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
2" Cutting Capacity Ideal for trimming brush.
High Blade Tip Speed 15,000 fm tip speed means cleaner cutting.
Two Parking Stands Easy and level storage, makes it easy for hooking to tractor.
In-line Filter Cleans hydraulic fluid before it re-enters the reservoir.
Shut-off Valve Permits maintenance with minimum oil loss.
Oil Pressure Gauge Easily monitor oil pressure for optimum performance of unit.
Hydraulic Breakaway Allows the parallel arms to pivot backwards to avoid obstacles and to protect cutter deck and parallel arms. Parallel arms are pivoted back to normal operating position with the hydraulic breakaway cylinder.
Gauge Wheels Option Decks on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and deck.
Independent Control Option (Self-Contained Hydraulics) Self contained hydraulic system eliminates the tractor/RCP hydraulic incompatibility. This option uses the RCP hydraulic system to operate the cutter.
Kubota 3-Point Stabilizer Kit Makes the RCP2760 Parallel Arm Rotary Cutter a match fit for Kubota tractor model numbers M126GX, M135GX, M6-141, and M6-141.
Slow Moving Vehicle Mounting
Socket (Standard)
Slow Moving Vehicle Sign
(Accessory)		 Mounting socket receives most slow moving vehicle signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer. Slow moving vehicle sign is offered as an accessory when the tractor’s slow moving vehicle sign and mounting blade does not fit the cutter’s standard mounting socket

Specifications

Model Nos. RCP3760, RCPM3760
Power Take-Off Input Speed  540 rpm
Deck Motor rpm @Power Take-Off
Speed		 1000 rpm @ 540 power take-off 
Minimum Tractor Horsepower  95 hp (70.8 kW)
Minimum Base Tractor Weight  12,000 Lbs. (5443 kg) without added weights
Weight  3410lbs (1547kg) (No fluid and without gauge wheels) 
Cutting Width  60" (152 cm) 
Overall Width (Fully Extended)  22'-11" (7m) 
Transport Width  10' (3 m) (without gauge wheels) 
Minimum Cutting Height (Deck Level)  2" (5 cm) 
Maximum Horizontal
Reach from Center Tractor  		 18'-10" (5.74 m) 
Maximum Vertical Reach
(Above Horizontal)  		 13'-5" (4.1 m) 
Maximum Vertical Reach (Below Horizontal)  11'-0" (3.4 m) 
Deck Rotating Arc  180 Degrees 
Blade Tip Speed 15,000 fm (76 mps)
Blade Size 1/2" x 4" (1.3 cm-10.2 cm)
Blade Rotation Clockwise
Blade Bolt 1 1/2" (3.8 cm) With keyway; nut
Dishpan 3/16" X 24" (.48 x 61.0 cm) Round, dish shaped
Cutting Capacity 2" Max. (5 cm) 
Deck Thickness 10 GA (3.4 mm) 
Speed Increaser Fluid Capacity 1 Pint (.47 L) 
Speed Increaser Fluid 80-90W EP Gearlube 
Hydraulic Fluid Mobilfluid 424
For alternate fluids, search on the web for “Mobilfluid 424” or go to www.mobil.com 
Reservoir Capacity and Filter 40 Gallons / Conventional 10 Micron Filter 
Hydraulic Fluid Flow Rate Approximately 15 gpm or 56.8 L/min.  
Overload Protection  Hydraulic relief valve  
Breakaway Protection Hydraulic Cylinder  
Driveline  ASAE Category 2
Hitch  3-Point Cat. 2 & 3 with clevis style lower hitch, Quick Hitch adaptable except with M126GX, M135GX, or M6-141 Kubota tractors
Skid Shoes  1/4" (.63 cm) Reversible 
Gauge Wheel Option  
Gauge Wheels Three 13 x 5.00 - 6 Semi-solid smooth tires with greasable caged roller bearings 
Height Adjustment Two Ratchet jacks
Hydraulic Control Options  
Options  
Optional & Accessory Equipment  
Operator Protective shield Extruded aluminum frame and glazed with 1/4" clear lexan polycarbonate
Kubota 3-Point Stabilizer Kit Not Available
SMV Sign (Accessory) Slow moving decal on galvanized steel back sign and plated or galvanized mount