309.751.4661   Silvis, IL - Map & Hours
Open today at 7:30am
  • Menu

Land Pride RCF2760

New / Land Pride / Rotary Cutters / RCF2760 & RCF2772 Series Rotary Cutters / RCF2760

Land Pride RCF2760 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Land Pride RCF2760 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
130 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 4 drive-line with 4-plate slip-clutch Slip-clutch drive-line offers convenience for continual work.
Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck construction with 1/4" side skits Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
11 1/4" Deck Height Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 3".
Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed
RCF2760 = 12,384 FPM
RCF2772 = 14,861 FPM		 Ensures clean cut.
Laminated tail-wheel Laminated material is long lasting in rough conditions.
4" x 15" Solid rubber tail-wheel Can't go flat.
1 1/2" Heavy-duty spindle on tail-wheel Tail-wheels take a beating, spindle gives the strength to protect tail-wheel assembly.
Optional Guarding Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and single chain guarding on the back.
Driveline Holder Keeps driveline up out of dirt. Easier hook up of drive-line.

Specifications

Model Numbers RCF2760
Machine Weight 955 lbs. (433.2 kg)
With front and rear Single Chain Guards
Hitch Category I or II with floating top linkage, Quick Hitch ready
Cutting Width 60" (1.52 m)
Overall Width 67" (1.70 m)
Overall Length 109" (2.77 m)
Deck Height (Bottom of Deck to Bottom of Skid Shoe) 11 1/4" (28.6 cm)
Cutting Height 1 1/2" - 12" (3.8 cm - 30.5 cm)
Cutting Capacity 3" (7.6 cm) Diameter
Recommended Tractor hp 35-130 hp (26.1-96.9 kw)
Power Take-Off Speed 540 rpm
Gearbox 540 rpm power take-off driven gearbox, 1:1.44 speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft
Gearbox Lubricant EP 80-90W oil
Gearbox oil Capacity 7 pints (3.31 L)
Deck Construction All welded deck
Deck Material Thickness 10 Gauge (3.4 mm)
Side Skirt Material Thickness 1/4" (6 mm)
Skid Construction Replaceable bolt on skid shoes
Stump Jumper 3/16" x 24" (0.5 cm x 61.0 cm) Round Pan
Blades (2) 1/2" x 4" x 25" (1.3 cm x 10.2 cm x 63.5 cm) Heat treated alloy steel free-swinging high lift
Blade Bolts Keyed with harden flat washers & lock nuts.
Blade Tip Speed 12,384 FPM (62.9 mps)
Drive-line ASAE Category 4
Drive-line Protection 4 plate slip clutch
Tail-wheel Mount Assembly Welded A-arm and caster fork with 360 degree swivel
Tail-wheel 4.00" x 8" x 15" (10.2 cm x 20.3 cm x 38.1 cm) Laminated tire with cast iron hub and tapered roller bearings
Front Guard Optional: Rubber Belting or Single Chain Guard
Rear Guard Single Chain Guard