Land Pride BSR30

Double tap to zoom

Features	Benefits
Cat.II & Cat. III 3-Point hitch	Works well with a lot of tractors.
Quick Hitch compatible	Easy to hook-up and unhook with a Quick Hitch. Bale Spear must be supported on blocks to use the Quick Hitch.
Replaceable spears	Spears are easily replaced if damaged.
Bales can be pushed with multi-spears	Good for pushing bales onto side dump trailers.
Spears punch holes in end of bale, not in the circumference	Very little moisture can enter the bale where the spears punch. Grappling type bale lifts punch holes in the circumference allowing moisture to penetrate the bale and accelerates bale deterioration.
BSR20 features two spears	Increased lift capacity and stability when lifting a single round bale.
BSR30 features three spears	Great for lifting a single square bale.
BSR30 spears are available in 32", 39", & 49" lengths (0.81m, 0.99m, & 1.24m)	Allows customer to select a spear length that won't punch holes on the opposite side of the bale but long enough to penetrate more than two-thirds the way into the bale for lift stability.
BSR40 features four spears	Great for lifting two round bales at the same time.

Specifications & Capacities
Model No.	BSR30
Frame lift capacity 24" from face of frame	1 - Square bale up to 3,000 lb (1361 kg)
3-Point hitch category	Cat. II & Cat. III
Quick Hitch Compatible	Yes, if Bale Spear is supported on blocks.
Spear diameter	1 3/4" (4.4 cm)
Number of spears	3
Overall spear length Short Medium Long	32" (0.81 m) 39" (0.99 m) 49" (124 m)
Spear probe length Short Face of frame to Medium end of point Long	27 1/2" (0.70m) 33 5/8" (0.85 m) 44 1/8" (1.12 m)
Weight of unit Short Medium Long	165 lbs (75 kg) 170 lbs (77 kg) 180 lbs (82 kg)
Number of spikes	N/A
Spike diameter and probe length	N/A
Spike probe length Face of frame to end of point	N/A

BSR20, BSR30 & BSR40 Series Bale Spears BSR30