309.751.4661   Silvis, IL - Map & Hours
Open today until 5:30pm
  • Menu

Land Pride FM2548 / NOT AVAILABLE

New / Land Pride / Grooming Mowers / FM25 Series Flail Mowers / FM2548

Land Pride FM2548 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Land Pride FM2548 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

Features Benefits
48", 60", 72", & 84" Cutting widths Wide selection of cutting widths to meet specific applications.
30-80 hp tractor Fits a large array of tractors to meet the needs of consumers, municipalities, and
landscapers.
Spring-loaded, self-indicating,
belt-tensioning system
(FM2560-FM2584)		 Available on 60", 72", and 84" models.
Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes
maintaining proper belt tension easy, and increases belt life.
0"-6" Cutting height Variable cutting height allows operators to scalp the ground, or leave a 1" to 6" cut.
1", 1 1/2", & 2"
Blade cutting capacity		 Ducks-foot blade can cut up to 1" small brush.
Heavy-duty Y blade can cut up to 1 1/2" brush.
Hammer blade can cut up to 2" small saplings.
Sealed heavy-duty tapered roller
rotor bearings		 Sealed for protection from dust and debris.
Withstand shock loads and deflection from heavy use.
Reverse rotor rotation Brings the cut material up and over which allows it to be dispersed more evenly. Allows
material to be shredded completely
High knife tip speed Knife tip speed 12,046 fpm provides a clean cut, creates a vacuum effect when using
hammer or ducks-foot blades, and slices through saplings with great force when using
heavy-duty Y blades.
Full width rear access door Allows for easy access to blades and rotor for replacing blades and cleaning out debris.
Quick-change D-ring blade system Replace ducks-foot blades without any tools.
3- “5V” Section Power-band Belt Power-band belt distributes load evenly, which prevents the belts from jumping off the
drive when a shock load occurs.
Hitch offset: 8" for FM2548-60
10" for FM2572-84		 The two position hitch allows the mower to be offset to the right for a closer cut
alongside buildings, fences, and roadsides.
Three blade options: ducks-foot,
hammer, heavy-duty Y		 Three blade options to meet specific applications.
Accessible rotor Rotor can be removed by unbolting cover plates and bearings.
Grease zerks on end caps of
drive-line cross journals		 Intermediate and main drive-line cross journals are easier to grease.
Standard removable roller scraper
mounted with only two bolts		 Keeps roller clean for consistent cutting height in wet conditions.
Two bolt mounting makes it easy to remove to allow heavy dry cuttings flow freely over
the roller.
Front safety chains Protects operator and bystanders from debris.
Replaceable skid shoes Prevents wear on end panels from ground contact.

Specifications

Model Number FM2548
Weight of Standard unit with optional ducksfoot rotor 780 lbs.
Weight of optional rotors: Blade qty / weight
20 ea. / 161 lbs. - Rotor with ducksfoot blades
24 ea. / 177 lbs. - Rotor with heavy duty Y blades
12 ea. / 182 lbs. - Rotor with hammer blades
Optional brush rake assembly 34 lbs.
Working width 48"
Overall width 60"
Drive cover height 33"
Rotor rpm 2450
Hitch Cat. I
Gearbox rating 80 hp
Driveline Cat. 4
Offset hitch Center or 8" Right
Blade tip speed 12,046 fpm
Blade attachment D-ring for ducksfoot blades, C-clamp for heavy-duty Y and hammer blades
Rotor bearings Spherical roller bearing
Brush rakes (standard) 8
Rotor diameter 5" With reinforcing bars
Rotor rotation Reverse
Cutting height 0"-6"
Cutting capacity Ducksfoot: 1"
Heavy-duty Y blades: 1.5"
Hammer blades: 2"
Rear roller diameter 5.56"
Hood/deck thickness 10 Ga