Exmark RAX651GKA484A3 / NOT AVAILABLE

UltraCut Deck Technology

Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 44- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.

Heavy Duty Unibody Frame

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

Quick Adjustable Rollover Protection System (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

Fuel Gauge Window

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

Height of Cut Made Easy

The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.

Comfort Stepped Up

X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.

Service Made Easy

A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.

NOTES: N/A in California

Equipment
Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires	24 x 9.5-12 K500
Cup Holder	Standard
Tractor Frame	Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Steering Control	Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires	13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
Parking Brake	Lever-actuated pawl brake.
Seat	Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Electrical	12-volt battery with 15-amp alternator.
Standard Features	Engine hour meter, cup holder, tow hitch and jack receiver
UPC	193308000411
Power Components
Engine Brand	Kawasaki®
Engine Model	FX651V
Engine Displacement	726
Engine Series	V-Twin
Engine Type	Carbureted
Engine Speed	3,700 rpm
Air Filter	Cyclonic Air Cleaner
Fuel Type	Gas Carbureted
Fuel Capacity	7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator	Translucent Visual
Drive	Hydro-Drive
Drive Description	Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed	Infinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-6.0 mph (9.7kmph) reverse.
Carb Compliant	No
Deck Lift	Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package	Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS	2-post foldable ROPS standard with seat belt and latch.
PTO Engagement	MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release	Allows unit movement without engine running.
Casters	.375" thick caster yoke arms
Decks
Width / Cutting Deck	48"
Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction	10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed	Approximately 18,500 fpm.
Cutting Heights	1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades	3 Blades at 16.25" Length
Dimensions
Width	59.5 in (151.1 cm)
Length	81.7 in (207.5 cm)
Height	70.4 inches (178.8 cm)
Curb Weight	937

Micro-Mulch System

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

 

 

Operator Controlled Discharge (Hand)

The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

 

 

12-Volt Power Adapter

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

 

 

3-Bushel Bagger Adapter

Adapter required for GC3602 3-Bushel Bagger (48" and 52" models).

 

 

5-Gallon Bucket

Carry a 5-gallon bucket on your mower to pick up unwanted debris while mowing. Mount not included.

 

 

Equipment Cover

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

 

 

Seat Cover– Suspension 20" Back

Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits suspension seat.)

 

 

Jack

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

 

 

Engine Maintenance Kit - Kawasaki FX

Contains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes Air Inner & Outer Element Filters, Oil Filter, Fuel Filter, Spark Plugs, Fuel Treatment and Engine Oil.

 

 

Extended Drive Lever Kit

 

 

 

Front Bucket Mount & 5-Gallon Bucket

Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing

 

 

Bucket Mount Kit

Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing. Bucket not included.

 

 

Hydro Maintenance Kit

Kit includes: 5 Bottles Exmark Premium Hydraulic Oil and 2 Hydro Filters

 

 

Light Kit - LED

Better and brighter than ever, this quick-install light kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity.

 

 

Sun Shade (ROPS)

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

 

 

Trash Container

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

 

 

Semi-Pneumatic Tire Assembly

Customize your ride with just the right caster tire.

 

 

3-Bushel Bagger

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models.

 

 

Turf Striping Kit

Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

 

 

Completing Kit - Powered

Completing Kit - Powered

 

 

UltraVac Completing Kit 

UltraVac Completing Kit

 

 

2-Bag Collection System – Powered

 

 

 

UltraVac

2-bagger commercial-grade powered collection system. Switch between bag discharge and side discharge with quick-attach. Less clogging with larger-diamer tubes. Compact design minimizes trailer space for easy maneuverability. Dust reduction with sealed hoods.