309.751.4661   Silvis, IL - Map & Hours
Open today until 5:30pm
  • Menu

Exmark LZS801GKA72RA1

New / Exmark / Zero-Turn Mowers / Lazer Z / LAZER Z S-SERIES / LZS801GKA72RA1

Exmark LZS801GKA72RA1 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Exmark LZS801GKA72RA1 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

Less Time At The Pump
Gas-powered S-Series models have a single 12-gallon tank with one fill location.

Built to Last
Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

On-Board Diagnostics
Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Fewer Grease Points
With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Ultracut Series 4 Deck
This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Tool-less Belt Removal
Deck and hydro belt can be installed without using any tools.

Specifications

EQUIPMENT  
UPC 193308240817
Starter Electric
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Caster Forks .50" thick caster yoke arms.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Parking Brake Lever-actuated disc brake.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Electrical 12-volt battery with 15-amp alternator.
Standard Features Engine hour meter and cup holder
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
POWER COMPONENTS  
Transmission Speeds Infinitely Variable
Engine Brand Kawasaki
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Speed Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
Transmission Hydrostatic
Engine Spec FX801V-ES19-R
Drive Hydro-Drive
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Fuel Type Gas Carbureted
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Fuel Indicator Yes - electronic Sender
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant No
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
DECKS  
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Width / Cutting Deck 72"
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
DIMENSIONS  
Width 78.2 in. (198.6 cm)
Height 70.5 in. (179.1 cm)
Length 86.1 in. (218.7 cm)
Curb Weight 1359