309.751.4661   Silvis, IL - Map & Hours
Open tomorrow at 7:30am
  • Menu

Exmark RAS708GEM60RC3 / NOT AVAILABLE

New / Exmark / Rear Discharge Mowers / Radius S-Series Rear Discharge / RAS708GEM60RC3

Exmark RAS708GEM60RC3 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Exmark RAS708GEM60RC3 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

HEAVY DUTY UNIBODY FRAME

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

QUICK ADJUSTABLE ROLLOVER PROTECTION SYSTEM (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

FUEL GAUGE WINDOW

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

HEIGHT OF CUT MADE EASY

The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.

ADJUSTABLE ISOLATION TECHNOLOGY

Designed to offer increased operator isolation from vibration and bumps, Exmark’s exclusive adjustable seat isolation technology uses rubber isolation bumpers to suspend the operator seat above the chassis.

SEAT FLIP-UP

Provides increased service access to fuel system and engine compartment or help keep the seating surface cool and dirt free when not in use.

RADIUS REAR DISCHARGE DECK

vailable in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.

Specifications

Equipment  
Blade Spindles No maintenance spindles and sealed and non-greasable. 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 10.5-12 K500
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
Parking Brake Lever-actuated pawl brake.
Seat High back seat with foam padded seat cushion, armrests and integral safety switch
Electrical 12-volt battery with 15-amp alternator.
Power Components  
Engine Brand Exmark
Engine Model 708
Engine Displacement 708
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,600 rpm
Air Filter Donaldson Heavy Duty air cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator Translucent Visual
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .375" thick caster yoke arms
Decks  
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 20.50" Length
Dimensions  
Width 66.0 in (167.6 cm)
Length 84.3 in (214.1 cm)
Height 70.2 inches (178.3 cm)

Accessories and Attachments

Sun Shade (ROPS)

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Trash Container

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Heavy Duty Front Shock

Heavy Duty Front Shock

Engine Maintenance Kit - Exmark® V-Twin Heavy-Duty

Semi-Pneumatic Tire Assembly

Customize your ride with just the right caster tire.

Finish Cut Baffles

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Light Kit - LED

Better and brighter than ever, this quick-install light kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity.

3-Bushel Bagger

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Hydro Maintenance Kit

Kit includes: 5 Bottles Exmark Premium Hydraulic Oil and 2 Hydro Filters

Jack

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Seat Cover– Suspension 20" Back

Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits suspension seat.)

White Non-Marking Side Bumper(requires 3231-7 & 104-8301)

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

Anti-Scalp and Side Wear Bar Kit

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Equipment Cover

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

12-Volt Power Port