309.751.4661   Silvis, IL - Map & Hours
Open tomorrow at 7:30am
  • Menu

Exmark LZS86TDYM12RW0

New / Exmark / Rear Discharge Mowers / Lazer Z Diesel Rear Discharge / LZS86TDYM12RW0

Exmark LZS86TDYM12RW0 for sale at Pillar Equipment, Quad Cities Region, Illinois

Double tap to zoom

Exmark LZS86TDYM12RW0 for sale at Pillar Equipment, Quad Cities Region, Illinois

 

Features

Improved Handling

The engine and radiator have been placed lower to the ground in the redesigned Lazer Z Diesel. This provides an even lower center of gravity leading to improved traction and a smoother ride.

Reduced Maintenance and Service

With an efficient and robust powertrain system, in addition to eliminating drive belts, these machines have less maintenance and longer service intervals. And the tool-less belt access and removable floor pan makes servicing easy.

Fuel Capacity

For longer work intervals, the Lazer Z Diesel has a 12.0-gallon capacity with two tanks. This will keep you mowing longer with fewer fill-ups.

Hydraulic Deck Lift

Standard on all diesel units, the hydraulic deck lift provides for easy cutting height adjustment and quick transport.

Tire Size / Ground Speed

The 26" x 12"-12" drive tires allow you to reach speeds up to 12.5 mph on machines equipped with the 1.6 Liter Common Rail engine. The large drive tires also provide superior traction and handling, giving you the ability to manage diverse terrain and conditions.

Productivity

The robust engine power and large deck sizes make these mowers Exmark's most productive diesel machines ever. They are a great solution for universities, municipalities and other sizeable properties.

On-Board Intelligence

The next generation RED leverages the latest technologies to deliver increased machine efficiency, ease of use and durability. This technology provides users an increased ability to control mower power and efficiency with defined performance modes.

Specifications

Model LZS86TDYM12RW0
Equipment  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Spring applied, hydraulic release internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 175-amp alternator.
Onboard Intelligence RED Technology
Standard Features 12-volt plug-in, engine hour meter and cup holder
UPC 193308219912
Power Components  
Engine Brand Yanmar
Engine Model 3TNV86CT
Engine Displacement 1568 cc
Engine Series TNV
Fuel System Common Rail Diesel with fuel cooler
Engine Speed 3,000 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 14-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 1.83/1.09 cubic inch 2 speed Danfoss axial piston motors plus Omni planetary gear reduction, hydraulic oil cooler.
Engine HP* 43.5*
Speed Infinitely variable speed selection from 0–10 mph (16 kmph) in low speed and 0-17 mph (27 kmph) in high speed forward, 0–10 mph (16 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Engine Spec DTR2
* *THE GROSS HORSEPOWER OF GASOLINE ENGINES WAS LABORATORY RATED AT 3600 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1940 OR SAE J2723. THE GROSS HORSEPOWER OF THE 3TNV80FT WAS LABORATORY RATED AT 2600 RPM; THE 3TNV88C AND THE 3TNV86CT WAS LABORATORY RATED AT 3000 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1995. AS CONFIGURED TO MEET SAFETY, EMISSION AND OPERATING REQUIREMENTS, THE ACTUAL ENGINE HORSEPOWER ON THESE MOWERS MAY BE SIGNIFICANTLY LOWER.
Decks  
Width / Cutting Deck 144"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear discharge standard, with finish cut baffles included.
Deck Construction 7-gauge high strength alloy top that is formed and seam welded, with  7-gauge high strength alloy side skirt. 
Blade Tip Speed Approximately 18,500 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 6 Blades at 24.50" Length
Dimensions  
Width 144.9 in. (368 cm), 84 in. (213 cm) @ 3 in HOC when folded
Length 101.3 in. (257.3 cm)
Height 72.6 in. (184.3 cm)
Curb Weight 3250 lbs.

Accessories and Attachments

Flasher Light Kit

Maximize both daytime and nighttime visibility with this low-profile, LED strobe kit.

LED Light Kit (not compatible with 135-2473)

Better and brighter than ever, this quick install light kit keeps your productivity going into the night. A powerful light without the use of significant amperage capacity.

Finish Cut Baffles

Finish cut baffles (144)

Jack

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Slow Moving Vehicle Sign Kit

Reflective slow moving vehicle sign ensures that you and your mower are highly visible.

Sun Shade (ROPS)

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Jack Mount Receiver

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack, attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.