Land Pride WC1503

Double tap to zoom

Features	Benefits
Quick Hitch Adaptable	Quickly and easily attach chipper to tractor with one person.
1/4" Thick Cutting Knife	Rotor features 2 replaceable 1/4" hardened steel cutting edges
Knives Can Be Rotated When One Cutting Edge Is Worn	Each knife has two cutting edges to extend knife life. When one edge is worn, rotate knife 180° to a new cutting edge. Less downtime required to sharpen knives
Knives Are Replaceable	Can replace knives when all cutting edges are worn out.
Two V-Belts	Designed to handle shock loads.
Spring Loaded Adjustable Idler	Allows for constant and proper tension on belt.
2-Bolt Flanged Bearings	Improves bearing life.
Cat. ll Shear-Bolt Driveline	Shear-bolt protects the unit when obstructions are encountered.
Skid Extension Supports	Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints
Adjustable Rotating Discharge Chute With Rotation Stops	Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute.
Adjustable Deflector Chute	Helps control the distance wood chips will be discharged away from the Wood Chipper
9,090 FPM Knife Speed	For cleaner cut and better discharge of wood chips.
Self-Feeding System	Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute.

Model	WC1503
HP Required	12 to 30 HP (Minimum 25 HP for maximum capacity)
Weight	369 lbs.
Hitch	Cat.1 w/ Quick Hitch capabilities
Upper Hitch Plate Thickness	1/4"
Main Frame Thickness	3/16"
Rotor Housing Thickness	3/16"
PTO Speed	540 RPM
Driveline Category	Cat. 2 with shear bolt
Main Drive Pulley Diameter	16.35"
Rotor Pulley Diameter	4.5"
Belts	2 single B section
Belt Tensioners	Spring loaded with adjustment
Rotor Size	17.5"
Rotor Speed	1984 RPM
Chip Capacity	3"
Hopper Inlet Opening	14"x 15"
Chipper Inlet Opening	6" x 3"
Spout Discharge Opening	3 1/4" Square
Cutting Knife	Reversible and Replaceable
Number of Knives	2
Knife Size	2.5" x 2" x 1/4"
Knife Material	Hardened Steel (Specifically designed for chipping)
Feed System	Self-feed
Chip Chute Position	270 degrees
Feed Height Above Ground	35" (Without adjustable skids)
Feed Height Adjustment	6 Settings (Includes without adjustable skids)
Color	Orange, Green & Beige

WC1503 Wood Chippers WC1503